You do need to use epoxy resin, freshly mixed. The longer it sits once mixed, the resin's curing process makes it a lot more difficult to impossible for the inks to do their thing, the thing that is called the petri dish effect.
Lessons Learned
Not For UV Resin. Find out what happened when I tried this method in UV resin.
As well, one big lesson learned was to not use my butane mini torch to eliminate bubbles in the resin, when using small silicone molds. The torch is too hot and the silicone actually burns, therefore ruining your molds and the piece you took time to create. Best way to remove those pesky bubbles in small molds is to use a lighter flame or heat gun, or if you can make it work, a straw that you blow through. That last one never seems to work well for me. Drool tends to dominate, running down the straw, about to ruin the resin.
Watch My Video Right Below
To See How Beautiful This Technique can be:
Materials Required
Silicone molds
Fresh mixed Epoxy Resin - I use Art Resin right now
Alcohol Inks that are not mixatifs or opaque
White opaque alcohol ink - it seems that Pinata by Jacquard is used most
Pipettes if you need to draw ink from a larger bottle of ink
A matt to keep our surface from staining
A heat gun or flame if you want the bubbles removed (do that before adding alcohol inks - alcohol is flammable!)
A dust cover to keep pieces clean while curing
Connect More
No comments:
Post a Comment