Showing posts with label lesson learned. Show all posts
Showing posts with label lesson learned. Show all posts

Friday, December 1, 2017

Polymer Clay Journey: My First Time - Christi Friesen Stamps & Mica Shift Technique

Hi guys! I got to use my new Christi Friesen texture stamps for my first official Mica Shift tutorial. Come and learn along with me. I used Premo Brand Pearl/metallic clays. Cindy Dietz at the polymer Clay Tutor Channel explains how mica shift works really well, just click here to learn.
Watch My First Time Mica Shift Technique Tutorial Below!

HeArtfully Creating,
Anita

Subscribe! Like and Share!! (if you want of course :o)

LIKE HeArtfully Creating Here on FACEBOOK

A Bergie Creation Shop Blog

A BERGIE CREATION - my handmade jewelry shop

 LIKE ABC On Facebook

ABC On Twitter

YOU Tube Channel

Pinterest

Thursday, November 24, 2016

My Polymer Clay Journey: Glazed And Confused?

A Practical Polymer Clay project I completed a while ago....
more on that in the future!
As I reported previously, in this article here about the Polyurethane peeling off of my pieces. (And yes, I used the exact kind recommended by many reputable Polymer Clay Artists).  I had to sand off all the Polyurethane and opted for sanding, buffing and waxing. Well, since that article, I have just read from The Blue Bottle Tree's Ginger Davis' Article, that the Renaissance Wax that came highly recommended by one of my favourite Poly Clay Sites - Isn't as protective as I believed it was. The Blue Bottle Tree says it isn't as protective to pieces with Mica powder on the surface, it may even remove it and that there are even more expensive ways to achieve the waxed effects.
Needless to say, initially, I felt confused about who to believe and what I should do. I am not dissing all the valuable lessons from those I have learned and are learning from...not at all.  I am saying that it is my fault for not researching on my own, by actually doing my own tests. Always have been lazy that way...finding a teaching and then devouring all they have to say, basically parroting them without questioning anything. Learning lessons the hard way means those lessons stay with you forever.
Conflicting Messages?
After countless attempts using recommended finishes, I personally recommend that if you want to seal or offer a glossy surface to your pieces, do your research. I have found conflicting articles by artists who I have learned from. It seems that some of the same methods and products when used by me, don't always works as described. Doesn't mean they were wrong. Maybe I do things differently and made a mistake?! Possible.
Regardless, I foolishly (in the beginning), just embraced, without question advice by purchasing and using specific glazes and such and covered a tonne of beads. (You know how much work that is!)
And then weeks later (sometimes even days later), when I went to use my beads or pendants, I discovered the surface to be sticky and ruined! Can't tell you how frustrating that can be. :o(  Not that any of the advice I gleaned was wrong or anything. It just means I have learned that lessons need to be learned through trial and error on my own, not just following others without question.
Yes as many of you may know, there are definitely well meaning tutorials from less experienced clayers (I assume) who give advice that ends up contradicting those Polymer Artists that have great reputations, the ones I trust far more, such as some of my favourites: the Polymer Clay Tutor,  Christi Friesen, Katers Acres,  and now, Blue Bottle Tree and Unruly Housewife. If I hadn't learned from these guys, then I would be making even bigger mistakes. So I strongly encourage endless hands on experience and research....
Some Final Thoughts....
After too many disappointing glazing moments, I highly suggest to do your own testing on small amounts to avoid wasting your time  and money. Bummer is, I bought one litre of Polyurethane and other glazes, now I will not be using them on clay! Be sure to research the terrific articles and videos by the many great poly clay artists online, but don't just assume every word of advice will work for you....test them out yourself or you'll learn the hard way like me

HeArtfully Creating,
Anita :o)


Sunday, October 4, 2015

Polymer Clay Journey: Lesson Learned about Mixing Clay Brands

Still loving working with polymer clay. In the beginning, I was following what the poly clay artists taught in their videos and tutorials. Lots to learn and now put into practice. 
One of the lessons I faithfully followed initially was...

#1 Polyform's PREMO and Souffle (all made by polyform) clay is the strongest and best for artistic purposes, like jewelry making.
Assuming that was true, I didn't try anything else. After all, what did I know as a newbie. Since my hands are weak though, I did notice that some of the colours (turns out some may have been on the shelf too long and firmed up) were pretty tough to condition, squeezing and manipulating the clay until it is pliable and all the polymer and such is well mixed, ready to use. Not wanting to depend on the pasta machine or clay conditioning machine, I want to use my hands as much as possible.

Curious, eventually, I purchased some Sculpey 3 and Fimo Effect and Fimo Soft. After all, Sculptey 3 is used by our  dear young friend Luke, who first introduced me to polymer clay. He is a faithful Sculpey 3 user and has made hundreds of adorable characters that are pretty durable. Check his pieces out below.

Well, I learned that SCULPEY 3 is so soft, it requires no effort, a dream, but, it is too weak for thinner pieces. Not to mention, I love that Sculpey 3 and all of the FIMO lines offer a lot more colours that I love. But strength is important in my pieces. First meet Luke and see the sampling of his hundreds of characters, all made by him. He has been making these guys for about five years or more now!
LUKE'S polymer clay creations. The fellow I first learned about  Poly Clay from.

LUKE'S polymer clay creations. The fellow I first learned about  Poly Clay from.

LUKE'S polymer clay creations. The fellow I first learned about  Poly Clay from.

LUKE'S polymer clay creations. The fellow I first learned about  Poly Clay from.
Combining Clays Works for Me
Wanting to work with a soft clay and more colour options, I began mixing my main clay brands, PREMO with Sculpey 3 and Fimo. Does it work? Well, here I am to share my experiment, so, yes! Of course clay strength depends on what your purpose or use is. In Luke's case, Sculpey 3 is soft, easy to use and because his pieces aren't thin and delicate, they stay strong. Because most of my pieces are to be worn as jewelry, I make sure if I am to combine clay brands, I make sure Premo or Souffle is at least fifty percent of the content.  And then based on advice I obtained from my research, bake the clay at the highest temperature. For example Premo is baked at 275 degrees fahrenheit and FIMO 265 degrees, if I combine the two, I bake or cure it at the 275 temperature. Nothing burns and so far all cures well. It is up to you, but I like to just turn off the oven and let it cool down on it's own.

I must say,  FIMO seems to be pretty solid as well when baked. It is all an ongoing trial and error, learning experience. I like learning by watching tutorials and by testing it out myself.

Lesson Learned
Mixing brands of clays can work. My biggest lesson lately has been, take the advice from the expert poly clay artists, but as you develop your skill, try new things. You aren't limited by anyone. If you are curious what would happen if you mix this or do that, then try it. If you are really young, make sure you always have an adult to supervise the oven use, as well as making sure you do not work with sharp blades. There are alternative ways to cut your clay if you have wee fingers.